Round 1 Portland International Raceway - Sun Jul 5, 2020

When you click OK the message box disappears. The your car (DPI) has turned into a yellow box car.
Reselecting a new car and then again your intended car seems to solve the issue...

 

The OK button in the Message box that shows the error (see also image in Pauls post)

 

the error msg shows ERFLAT6_WINDOWS.BMP etc.
Strange that this is shown when using the DPI Cadillac only???

 

then i better try to find a good setup for the acura then.. (just in case)

 

Interesting... setup settings for the Cadillac can be used for the Acura as well.
If that makes sense should be decided by yourself. But for me it works.

 

Hi guys

the race starts at 19.20 gmt?

I have no problems with flat6 on the server

 

Will check after I finished my workday

 

Remember you can only test this error if you join the server when there are Flat6 cars present. Joining the server on your own will be ok

 

"package not available" for me

 

I have asked a question about this issue in the RSS Modding Group on Facebook. However the post is still pending approval. I'll let you know if I get anywhere with this enquiry

 

Sad to report that the Acura has exactly the same problem. I suspect the other DPi car in this pack will be the same

 

Exactly what I expected. The Acura is (based on) the same car as the Cadillac. You can even use the same setup files.
I believe there is some kind of conflict with the Flat6 cars (have these been used in multiclass series before?)

I found out that there is a way to overcome the problem (both with Cadillac and Acura obviously).
- when you get the error message; click the OK button in the message box. Then your car has turned in a yellow box car...
- select another car and if you like select then back to your original car and that all seems good.
(Best start with the car you don't want and then you have te re-select only once)

I hope we can keep the DPI's in the race this way...