I have installed DeekSeek on my computer and was wondering how it could help my SIM racing. I gave it a simple question not describing I am using a game but a real car. The results seem accurate to setup norms. Let's see if AI can improve my racing. >>> My car is loose in corners, what toe-in setting in degrees I should set it at? To address your car's corner looseness by adjusting the toe-in setting, follow these steps: 1. **Understand Toe-In**: Toe-in refers to the angle between the wheel and the vehicle's longitudinal axis. It is typically measured in degrees. 2. **Determine Current Setting**: Check the current toe-in value of your car. This can be done through your car's service manual or by consulting a trusted source for accurate information. 3. **Adjust Toe-In Settings**: - **Increase Toe-In (Positive Adjustment)**: If your car feels too stiff or unstable in corners, slightly increasing the toe-in could enhance stability. - **Decrease Toe-In (Negative Adjustment)**: If oversteering is an issue, decreasing the toe-in might improve handling. 4. **Consult Manufacturer Guidelines**: Refer to your car's service manual or online resources for the recommended toe-in setting based on your vehicle's specific use and conditions. 5. **Use Toe-In Tools**: Utilize specialized tools designed for adjusting toe-in settings without the need for complex rebuilds. 6. **Test Drive Post-Adjustment**: After making adjustments, test drive the car in various corner scenarios to assess improvement. Adjust further as needed based on your driving experience. 7. **Consider Other Factors**: If issues persist despite toe-in adjustments, evaluate other factors like tire wear, suspension setup, or alignment. 8. **Consult a Professional**: For unresolved issues, consult a mechanic for a thorough assessment and potential corrective measures. By following these steps, you can systematically adjust the toe-in setting to improve your car's stability in corners.
I'd like there to be a definitive statement of whether minus Toe-In means a negative or a positive setting in setup screens as some sims appear to work opposite of each other.
I'm determining the maximum DeepSeek model size I can run with Ollama to build dedicated sim-racing game databases. I have just installed 14 billion models and my computer seems to run okay so far. Later today after shovelling snow, I will be upgrading that to 32 billion models. My computer hasn't overheated at 14B so I am going for 32B. I am using the PowerShell to run the AI for speed, if I used a desktop program, it would be too slow.
Just imaging using AI to developed mods for gaming. In our case SIM racing modules. First, I need a data base, having BlueSeek to create it.
When discussing your race car, state facts before posing questions. Question marks tend to elicit overly detailed responses. Brief, direct statements yield more focused answers. I'm still learning this myself! LOL Me: >>> A car setup for game; project cars 2. Setup for bmw m1 procar. The race is 45 minutes at sportsland sugo. DeepSeek: To set up a BMW M1 ProCar for a 45-minute race at Sportsland Sugoi, follow this organized configuration plan: ### Chassis Setup - **Aero**: Install full wing with spoilers to enhance downforce and reduce drag. - **Anti-Roll Bars**: Apply stiffer settings to control roll during turns. ### Engine Tuning - **Power**: Increase power slightly for quick acceleration without overloading top RPMs. - **Torque**: Optimize mid-range torque for balanced straight-line performance and cornering. ### Suspension - **Suspension Stiffness**: Choose a stiffer configuration for tighter turning radii and better stability. - **Suspension Lowering**: Reduce by 10mm to decrease weight transfer and improve handling. ### Brakes - **Front Brake Power**: Use strong brake settings to ensure good grip during deceleration. - **Toe Adjustment**: Set toe-in slightly for consistent braking behavior. ### Gearing - **Final Drive Ratio**: Select a higher ratio (e.g., 3.2) for smoother acceleration and better top speed. ### Tire Setup - **Tire Compound**: Choose medium soft for optimal grip during the race. - **Groove Depth**: Use deeper grooves to enhance stability at high speeds. ### Additional Considerations - **Engine Cooling**: Ensure sufficient cooling to prevent overheating during short races. - **Grip Reduction**: Apply light grip reduction (e.g., 20%) to maintain stability without sacrificing acceleration. ### Racing Mode Optimization - Utilize Sportsland Sugoi's racing mode if available for optimized setups tailored to short tracks. By systematically adjusting each component, you can create a balanced and performant setup that maximizes speed on straights while maintaining control during turns. Testing within the game will help fine-tune these settings based on race data performance.
